Морские водозаборные сооружения в основном делятся на три типа, включая водозабор из пляжных колодцев, водозабор из подземных источников и открытый морской водозабор. В этой статье мы рассмотрим варианты технологий забора морской воды, доступные для опреснительные установкии рассмотрит технологии, используемые для обеспечения надежного количества морской воды наилучшего качества.

1. Пляжный колодец

Beach well intake means that seawater out from intake well constructed as close to the coastline as possible is filtered by seabed as the water source of desalination plant. This kind of seawater is especially attracted by seawater desalination reverse osmosis plant with the advantages of low turbidity and good quality due to particles in sea water are trapped from natural filtration. Seawater desalination intake project is the vital part of desalination plant, which is to ensure that sufficient, consistent and reliable feed water can be delivered for seawater desalination plant within the entire lifetime. The intake facilities and construction of intake structure both have important impact on seawater desalination plant investment, production cost, system operation stably and ecological environment. Investment of seawater desalination, scale of construction, and process for water quality requirements should be taken into consideration while developing intake projects. At the same time, water intake and its facilities are selected based on hydrology water quality in intake area, geology conditions, meteorological data and natural disaster.

2. Subsurface Water Intake

The deep seawater of open ocean is delivered to the shore-side through building intake pipes and then supplied to desalination project by pump plant constructed in the coastline, this is called” subsurface water intake”. Generally speaking, when sea level below 1~6m, intake water contains small fish, water grass, seaweed and other microorganism, thus water quality is not good. The content of these materials is 20 times reduction when intake level is above beneath sea level 35m, and water quality is good, which can greatly reduce the operating cost of the pre-treatment equipment. Meanwhile, water temperature in subsurface is lower, benefit to thermal seawater desalination process. This kind of intake is usually adopted on areas where seabed is quite precipitous, which is within 50 m from the coast and water depth up to 35 m.

3. Open Sea Water Intake

Open sea water intake is the most common intake project. Although its water quality not good, it is still widely adopted due to advantages of small investment, wide application range and full application experience.

Заключение

Приемные пункты для seawater desalination project в основном классифицируются на три вышеуказанных типа, включая пляжный колодезный водозабор, подземный водозабор и открытый морской водозабор. Сырая вода хорошего качества может быть доставлена с помощью пляжного колодца, что позволяет снизить инвестиции и эксплуатационные расходы на оборудование предварительной очистки, однако при этом следует учитывать морскую геологическую структуру, гидрологическое качество воды и факторы нестабильности качества воды при эксплуатации, а также подтвердить их после проведения глубокого исследования. Подземный водозабор способен поставлять довольно хорошую воду, но этот вид водозабора, вероятно, менее принят из-за больших инвестиций и сложного строительства. Открытый морской водозабор - более популярный метод водозабора, который может быть использован для различных проектов опреснения морской воды.

While designing seawater intake project, We should comprehensively take corrosion of metallic materials in seawater, sea creatures and the influence of tides into consideration.

Последние проекты

Получите решение сегодня!