Filipinler'de günde 40 ton deniz suyu ters osmoz sistemi

Project Overview

Bohol Island, a prominent tourist destination in the Philippines, encounters freshwater lacks during the completely dry period. Local groundwater is impacted by seawater intrusion, with TDS values as high as 30,000– 35,000 mg/L, while neighborhood alcohol consumption water need to adhere to the Philippine National Drinking Water Requirement (PNSDW: TDS ≤ 800 mg/L). This job aims to develop a trustworthy deniz suyu tuzdan arındırma sistemi to attend to the everyday water needs of a 200-person neighborhood.

Technical Parameters for seawater reverse osmosis system

• Water Manufacturing Capability 40 m3 / day (scalable to 50 m3 / day)
• Raw Water TDS 35,000 ± 5,000 mg/L.
• Generated Water TDS ≤ 800 mg/L
• Recovery Rate 35%– 40%.
• System Energy Consumption ≤ 4.0 kWh/m FOUR
• Operating Temperature Variety 28– 40 ° C( Tropical climate-adapted).

SWRO System Make-up and Cutting-edge Design

1. Pre-treatment Component.

• Multi-media filter: removes suspended solids (SS ≤ 50 μm).
• Automatic backwashing system: addresses high turbidity salt water during the rainy period (turbidity optimal 40 NTU).
• Range prevention application system: Avoids CaSO four crystallisation (controls LSI < 1.8).

2. Main Treatment Unit.

• Anti-fouling SWRO membrane component: DOW ro membrane (solitary membrane desalination rate 99.6%).
• One-stage pressure increasing arrangement:.
• Stage 1 high-pressure pump (3.5 kW): Increases pressure to 55– 60 bar.

3. Smart control system.

• PLC + HM human-machine interface: Real-time tracking of ORP/TOC/pressure.
• Cloud-based remote management: Sustains fault medical diagnosis (covered by Baohe Island 4G network).

4. Special setting adjustment.

• Container-style real estate: IP55 protection rating, immune to salt fog corrosion.
•  Solar back-up system: 20 kW off-grid power supply (to resolve regular power outages).

Trick Obstacles and Solutions

Water High Quality Confirmation (Third-Party Screening)

6. Economic Conveniences.

• Water manufacturing expense: 0.85 USD/m THREE (including procedure and maintenance).
• Yearly water cost savings: 14,600 m ³ (equal to decreasing 5,000 tonnes of shipped freshwater).
• Repayment duration: 3.2 years (contrasted to trucked water cost of 12 pesos/L).

7. Job Highlights.

✅ Bottleneck-free layout: 20% capability redundancy booked to fulfill peak need throughout the traveler period.
✅ Zero wastewater discharge: Focused salt water utilized for salt production at the community salt area (TDS ≈ 60,000 mg/L).
✅ Community empowerment: Training of 3 regional drivers (including 1 lady).

Note: The system has obtained ETWPS accreditation from the Philippine Division of Setting and Natural Resources (DENR) and abide by the DAO 2016-08 water discharge requirements.

8. Continuous Renovation Instructions.

1. Test brand-new graphene membrane layers (laboratory-stage change improvement of 47%).
2. Integrate a rain harvesting system (yearly boost in supply of water of 3,000 m FOUR).
3. Establish a mobile application for water bill settlements (covering 80% of smart device individuals).

This study efficiently demonstrates that modular reverse osmosis technology can achieve trusted water supply with low operational dependency with intelligent style in exotic island scenarios, supplying a replicable freshwater remedy for coastal communities in Southeast Asia.

If a PowerPoint variation of the technical proposal or design layout is needed, CAD/DWG layout in-depth style documents can be supplied.

Bugün Bir Çözüm Bulun!