portable solar powered desalination unit

Portable solar powered desalination unit

  • With wheels and it is only 25 kg
  • Power supply 220V1110V, DC24V112V ,Li Battery, solar power
  • Only two buttons to operate and everyone can use it
  • The pressure is automatically adjusted according to the the sanility
  • With energy recovery unit and is oil free lubricaton
  • Use high pressure RO membrance the destinization rate up to 99%
Solicitar presupuesto

Kysearo portable solar powered desalination unit with lightweight design, reverse osmosis for drinking water quality, and multi power supply as our  advantages. Combined with minimalist operation and high durability,  our units ideal freshwater solution for maritime rescue, outdoor exploration, and island living.

Technical Parameters

Model NO.: KY-2514

Water yield: 6L/H (120 liters/day)
Outline Dimention: 58*43.5*23CM
Water Outlet: TDS <700
Water Inlet: TDS <40000
Power: 45W
Voltage: Solar panel (100W standard configuration); DC24V(DC12V)
Current: 2A(4A)
Weight: 25kg

Envíenos sus requisitos
portable solar powered desalination kit

Advantages of portable solar powered desalination unit

Solar-powered: Standard configuration includes a 100W solar panel + energy storage battery, enabling continuous water production in off-grid environments. Daily power generation supports 24/7 operation.

Portable design: Integrated wheeled suitcase-style body, movable by a single person; folds down to just 0.06m³ (equivalent to a carry-on luggage size).

Water output: Automatic pressure adjustment based on incoming water salinity | 3-minute quick start | Compatible with TDS water quality testing pens for real-time verification

Safety protection: Oil-free lubrication system

SUS 316 stainless steel pre-filter mesh (reusable and washable)

Low energy consumption: High-pressure RO membrane + proprietary energy recovery device, reducing energy consumption by 80% compared to traditional equipment.

portable solar powered desalination

Obtenga una solución ahora

Operation of portable solar powered desalination unit

1.0pen the outer case and check the accessories which include: 1 set of blue water inlet pipe with block strainer, 1 set of yellow waste water pipe,1 set of transparent water purification pipe and 1 piece TDS test pen. Plug in the 24V power supply.

2.Plug in the water inlet (blue), waste water (yellow)  and clean wate (transparent)pipes according to the marked
sequence at the joint.

3.Plug in the power supply as marked.

portable solar desalination unit

4.Make sure that the arrow of flushing water valve  points to the position of flushing mark, put the blue inlet
pipe into sea.

5.Press the start/stop button,the blue indicator light turned on, and the water inlet pump starts to work, till the yellow water pipe has water flowing out with no airis discharged.

6.Turn the flushing water making valve to the water producing valve, and the pressure value of the high pressure gauge starts to rise.

7.Test the purified water with TDS pen, when the value of the purified water is below 700, which can reach the drinking standard and can be drank.

8.To shutdown the machine for a short time, first to turn the water making flushing valve to the flushing position.After the high-pressure meter shows no pressure, turn off the power, and then pull out the water pipe according to the snap of the water pipe quick connector.

9.To shutdown the machine for long-term time. First,  take about 5L of freshwater, put the water inlet pipe, waste water pipe and water purification pipe into the fresh water,operate according to the previous waterpurifying
process, and shutdown machine and store them in accordance with step 8 after 3-5 minutes.