تصنف منشآت سحب مياه البحر بشكل أساسي إلى ثلاثة أنواع، بما في ذلك سحب مياه الآبار الشاطئية، وسحب المياه تحت السطحية، وسحب مياه البحر المفتوحة. وستتناول هذه المقالة خيارات تكنولوجيا سحب مياه البحر المتاحة لـ محطات تحلية المياهوستستعرض التقنيات المستخدمة لتوفير كمية موثوقة من مياه البحر بأفضل جودة متاحة.

1. مأخذ بئر الشاطئ

Beach well intake means that seawater out from intake well constructed as close to the coastline as possible is filtered by seabed as the water source of desalination plant. This kind of seawater is especially attracted by seawater desalination reverse osmosis plant with the advantages of low turbidity and good quality due to particles in sea water are trapped from natural filtration. Seawater desalination intake project is the vital part of desalination plant, which is to ensure that sufficient, consistent and reliable feed water can be delivered for seawater desalination plant within the entire lifetime. The intake facilities and construction of intake structure both have important impact on seawater desalination plant investment, production cost, system operation stably and ecological environment. Investment of seawater desalination, scale of construction, and process for water quality requirements should be taken into consideration while developing intake projects. At the same time, water intake and its facilities are selected based on hydrology water quality in intake area, geology conditions, meteorological data and natural disaster.

2. Subsurface Water Intake

The deep seawater of open ocean is delivered to the shore-side through building intake pipes and then supplied to desalination project by pump plant constructed in the coastline, this is called” subsurface water intake”. Generally speaking, when sea level below 1~6m, intake water contains small fish, water grass, seaweed and other microorganism, thus water quality is not good. The content of these materials is 20 times reduction when intake level is above beneath sea level 35m, and water quality is good, which can greatly reduce the operating cost of the pre-treatment equipment. Meanwhile, water temperature in subsurface is lower, benefit to thermal seawater desalination process. This kind of intake is usually adopted on areas where seabed is quite precipitous, which is within 50 m from the coast and water depth up to 35 m.

3. Open Sea Water Intake

Open sea water intake is the most common intake project. Although its water quality not good, it is still widely adopted due to advantages of small investment, wide application range and full application experience.

Conclusion

مرافق الاستقبال لـ seawater desalination project يتم تصنيفها بشكل أساسي إلى الأنواع الثلاثة المذكورة أعلاه، بما في ذلك مأخذ بئر الشاطئ، ومأخذ المياه تحت السطح، ومأخذ مياه البحر المفتوح. يمكن توصيل المياه الخام ذات النوعية الجيدة عن طريق مأخذ مياه الآبار الشاطئية، وبالتالي يقلل من الاستثمار وتكلفة تشغيل معدات المعالجة المسبقة، ومع ذلك يجب أن يؤخذ في الاعتبار التركيب الجيولوجي البحري ونوعية المياه الهيدرولوجية وعوامل عدم استقرار نوعية المياه عند التشغيل، والتأكد من ذلك بعد البحث في تحقيق متعمق. إن مأخذ المياه تحت السطح قادر على توفير مياه جيدة جدًا، ولكن هذا النوع من المآخذ ربما يكون أقل اعتمادًا بسبب استثماره الكبير وبنائه المعقد. مأخذ مياه البحر المفتوح - وهو نوع من طرق السحب الأكثر شيوعًا، ويمكن استخدامه في مشاريع تحلية مياه البحر المختلفة.

While designing seawater intake project, We should comprehensively take corrosion of metallic materials in seawater, sea creatures and the influence of tides into consideration.

المشاريع الأخيرة

احصل على حل اليوم!